Hualian
FRB-770III Floor-Standing Continuous Band Sealer
- Sealing speed
- 0–12 m/min (0–16)
- Seal width
- 8–10 mm
- Temperature control range
- 0–300 °C (steplessly adjustable)
FRB-770II Vertical Continuous Band Sealer
Vertical continuous band sealer; 0–12 m/min band speed, stepless 0–300 °C, 37 kg.
Key specifications
- Sealing speed
- 0–12 m/min (0–16)
- Seal width
- 8–10 mm
- Temperature control range
- 0–300 °C (steplessly adjustable)
- Voltage
- AC 220 V / 50 Hz; 110 V / 60 Hz
- Net weight
- 37 kg
- Dimensions (L × W × H)
- 840 × 380 × 550 mm
Hualian FRB-770II
Prices are given in a written quote, by model and quantity.
How it works
Follow it step by step: pause, jump to a step, or tap a part in the diagram to see what it does.
Parts
Tap a part in the diagram or choose its name; the part is highlighted and shown close up.
- Infeed opening
- The bag mouth enters between the two bands here. Its position is set by the distance from the seal line to the bag mouth.
- Sealing bands
- An upper and a lower band grip the bag mouth and carry it between the heating and cooling blocks.
- Heating blocks
- The upper and lower blocks heat the film between the bands. Temperature is set on the control panel over 0–300 °C; the gap between the blocks is set to the film thickness.
- Pressure roller
- Right after heating it presses the two molten film layers together.
- Cooling blocks
- The seal cools and sets between these blocks.
- Embossing wheel
- Presses the seal against the silicone wheel opposite, leaving a ribbed or mesh pattern; pressure is set with an adjusting knob.
- Conveyor
- Carries the bag body at the same speed as the bands. Its height and level are set to suit the package.
Infeed
The bag is placed on the conveyor and fed from the right, its mouth lined up with the infeed opening. In the diagram the cover lifts to show the sealing head in section.
Grip
The two sealing bands grip the bag mouth and carry it forward while the conveyor moves the body at the same speed. Bands, guide belts and conveyor run from one motor.
Heating
The bands carry the mouth between the upper and lower heating blocks. The film melts and bonds, and a pressure roller presses the two layers together. Block temperature is adjustable over 0–300 °C.
Cooling
The mouth passes between the cooling blocks, where the seal cools and sets.
Embossing
The embossing wheel presses the seal against a silicone wheel, leaving a ribbed or mesh pattern.
Outfeed
The sealed bag leaves on the conveyor. Three key settings: block temperature, band speed and seal width. Temperature and speed are set on the control panel.
- Temperature
- 0–300 °C
- Band speed
- 0–12 m/min
- Seal width
- 8–10 mm
Technical specifications
| Voltage | AC 220 V / 50 Hz; 110 V / 60 Hz |
|---|---|
| Motor power | 50 W |
| Heater power | 300 W × 2 |
| Sealing speed | 0–12 m/min (0–16) |
| Seal width | 8–10 mm |
| Temperature control range | 0–300 °C (steplessly adjustable) |
| Film thickness (single layer) | < 0.08 mm |
| Max. conveyor load per package | 1 kg |
| Max. total conveyor load | 3 kg |
| Feed direction | On the FRB-770 series the bag is fed in from the right |
| Distance from seal centre to conveyor table | 150–270 mm |
| Dimensions (L × W × H) | 840 × 380 × 550 mm |
| Net weight | 37 kg |
Taken from the manufacturer’s catalogue.
Documents
Service and spare parts
Maintenance, repair and spare parts for the machines and instruments we sell are handled by our service workshop at İMÇ, Istanbul. When you ask for a spare part, give the brand, the model and the serial number.
Open the service page- Service phone
- +90 212 519 29 70
- +90 541 889 00 92
- Service address
- İMÇ 5. Blok No:5413, Unkapanı / İstanbul
Hualian
FRBM-810I Horizontal Continuous Band Sealer
- Sealing speed
- 0–16 m/min
- Seal width
- 8 mm / 10 mm
- Temperature control range
- 0–300 °C (steplessly adjustable)
Hualian
FRBM-810II Vertical Continuous Band Sealer
- Sealing speed
- 0–16 m/min
- Seal width
- 8 mm / 10 mm
- Temperature control range
- 0–300 °C (steplessly adjustable)
Hualian
FRBM-810III Floor-Standing Continuous Band Sealer
- Sealing speed
- 0–16 m/min
- Seal width
- 8 mm / 10 mm
- Temperature control range
- 0–300 °C (steplessly adjustable)
Request a quote for this product
Use the “What you need” field to tell us which model and how many units you need. The sales team replies with a written quote covering price, delivery time and service terms.
- Product to be quoted
- Hualian FRB-770II Vertical Continuous Band Sealer